MicroCal TCS 1200
Dry Block Multifunction High-Temperature Calibrator
The MicroCal TCS Series has been designed to verify and calibrate temperature sensors, thermometers, and process transmitters both in laboratory and in-field.
All the three available models are fast, high stability and uniformity, easy to use temperature calibrators.
The temperature parameter represents the most important factor to fulfill quality, operational safety and reliability of industrial processes.
Thermocouples, RTDs and any other temperature sensors, when installed in an industrial process, they are subjected to mechanical, thermal and chemical stresses which accelerate their aging.
Therefore it is a recommended procedure to inspect, check and calibrate each sensor during the commissioning phase and at regular and programmed time intervals.
MicroCal TCS temperature source find applications in checks and calibration of: Thermocouples, Resistance thermometers, Temperature transmitters, thermostats, glass thermometers, and NTC/PTC.
The MicroCal TCS1200 portable very high temperature (150°C to 1200°C) calibration in an easy to use, portable and rugged unit.
The calibrator can be used as a Dry Block and a Black body source for infrared thermometers.
The temperature controlled allows very fast temperature stabilization and high stability. The standard configuration includes the 4-holes 80 mm deep metal block.
Other products of interest
The MicroCal T100 dry-wells is designed to check and calibrate thermometers, temperature transmitters and temperature sensors.
The MicroCal T1100 dry-wells is designed to check and calibrate thermometers, temperature transmitters and temperature sensors.
The MicroCal T200 thermostatic bath is designed to check and calibrate thermometers, temperature transmitters and temperature sensors.
The MicroCal T350 dry-wells allow users to easy check the calibration of a wide range of instrumentation including digital thermometers, bi-metal dial thermometers, thermosensors and temperature switches that need calibration check from ambient to 350°
The MicroCal T500 dry-wells is designed to check and calibrate thermometers, temperature transmitters and temperature sensors.
The MicroCal TCS Series has been designed to verify and calibrate temperature sensors, thermometers, and process transmitters both in laboratory and in-field.
The MicroCal TCS Series has been designed to verify and calibrate temperature sensors, thermometers, and process transmitters both in laboratory and in-field.